LEFILTER's Water Treatment & Process Solutions business unit offers a wide range of quality seawater reverse osmosis (RO) components designed to reduce the investment cost and operating cost of desalination systems.
•High rate of desalination and boron removal.
•Maximum guaranteed active membrane area of 400 square feet (37 square meters)
•Maximum effective membrane area and inlet runner width (34 mil) to help reduce cleaning frequency and increase cleaning efficiency
•No oxidizing post-treatment is used in membrane production, ensuring sustainable high performance over the life of the element.
•Efficient utilization in produced-water flow-through desalination systems without impacting downstream process performance
Specified Performance*
| Permeate Flow: |
11,000 gpd (41.6 m3 /d) |
| Salt Rejection: |
99.8% (Minimum Salt Rejection 99.65%) |
| Test Conditions: |
2000 ppm NaCl solution 225 psig (1.55 MPa) Applied Pressure 77 °F (25 °C) Operating Temperature 15% Permeate Recovery 6.5 - 7.0 pH Range |
General Product Description*
| Configuration: |
Aromatic Polyamide Composite |
| Membrane Polymer: |
Composite Polyamide |
| Membrane Active Area**: |
400 ft2 (37 m2 ) |
| Feed Spacer: |
34mil |
Dow FILMTECTM membrane elements come in different models, each for different applications and conditions of use:
1. NF270 - Medium-sized desalination rate and hardness transmission rate of nanofiltration membrane, high removal of organic matter, high water production
2, NF200 - medium hardness membrane permeability of nanofiltration, with high herbicide (such as deuterated net) and TOC removal rate
3, NF90 - 90% salt removal rate of nanofiltration membrane, with high iron, insecticides, herbicides and TOC removal rate
4, NF - process material concentration with nanofiltration membrane
5, XLE - very low energy consumption (pressure) reverse osmosis components, mainly used for commercial or large municipal water treatment
6, LP - tape wound ultra-low pressure reverse osmosis element, a new generation of high desalination rate of commercial ultra-low pressure reverse osmosis membrane elements
7, BW30HRLE - a new type of fiberglass winding high salt rejection of low energy brackish water reverse osmosis element
8, TW30 - Tape winding standard low pressure reverse osmosis membrane component, mainly used for high desalination rate of tap water into commercial reverse osmosis system
9, BW30 - FRP winding standard low pressure brackish water reverse osmosis membrane components, mainly used for multiple series high desalination rate reverse osmosis system
10, BW30LE - standard low energy brackish water reverse osmosis element
11, LE - new low-energy brackish water reverse osmosis element
12. RO - Health Grade Reverse Osmosis Element
13, HSRO - Thermal disinfection of sanitary reverse osmosis elements
14, SG30 - Semiconductor grade reverse osmosis element for ultrapure water
15. SG30LE - Semiconductor Grade Reverse Osmosis Element for Low Energy Ultrapure Water
16, SW30 - seawater and high salinity brackish water (subtropical water) reverse osmosis elements
17, SW30XLE - a new type of very low energy seawater or high salinity brackish water (subsea water) reverse osmosis element
18, SW30HR - standard high desalination rate (single stage seawater desalination) seawater reverse osmosis element
19, SW30HRLE - a new type of high desalination rate and low energy consumption (single stage seawater desalination) seawater reverse osmosis element
Product Use and Restrictions*
| Maximum Applied Pressure: |
600 psig (4.1 MPa) |
| Maximum Chlorine Concentration: |
< 0.1 ppm |
| Maximum Operating Temperature: |
113 °F (45 °C) |
| pH Range, Continuous (Cleaning): |
2-11 (1-13) |
| Maximum Feedwater Turbidity: |
1.0 NTU |
| Maximum Feedwater SDI (15 mins): |
5.0 |
| Maximum Pressure Drop for Each Element: |
20 psi (0.14 MPa) |
Operating Instructions:
Dramatic changes in pressure or misflow flow should be avoided during startup, shutdown, cleaning, or other processes to prevent membrane damage.
During startup, we recommend the following procedure for gradual transition from standstill to operation:
- Inlet pressure should gradually increase over 30-60 seconds.
- The design staggered flow rate should be reached within 15-20 seconds.
- The water produced during the first hour of operation should be drained off.
Xinxiang Lifeierte Filter Corp.,Ltd (Stock code:837936)is specialized in manufacture of filters ,filter equipment,and environment system . Located in Xinxiang City-the center of Filtration in China.Lefilter has superior R & D team, professional technical team,experienced overseas sales team and perfect after-sales service system.We Lefilter people will try our best to satisfy customers' requirements.The develop philosophy of LEFILTER is "To purify environment,To serve society,To manage faithfully and To oyrsye excellence"!What's more,there're advanced production line,test machine and R & D department.They also obtained certification like ISO9001, IQNet & CQM,SGS,CNEX etc.
Company Address: Lefilter Building ,No.9 Hongli Avenue, Muye District ,Xinxiang City,Henan Province,China
Factory Address:Filter Industry Park Beihuan Road,Muye District,Xinxiang City,Henan Province,China
Web.:chinafilters.en.made-in-china.com
){kind=link}