| Customization: | Available |
|---|---|
| Type: | Reverse Osmosis |
| Usage: | Environmental Protection, Chemical Industry |
|
Still deciding? Get samples of US$ 28.68/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The high flow filter element uses deep fine polypropylene or fiberglass membrane as the filter material, with a large diameter of 6 inches/152mm, no center rod, one-way opening, and specially designed liquid flow from inside to outside, ensuring that all pollutant particles are intercepted inside the filter element. The design of super large flow rate significantly reduces the usage of filter elements and filters in the same flow rate application, greatly saving equipment investment costs and labor costs.
Product Features:
1. The combination of surface filtration and deep filtration can significantly reduce the number of filter elements and significantly reduce the size of the supporting shell compared to ordinary filter elements;
2. The filter layer is made of high-efficiency and low resistance materials, which can achieve ultra-high filtration efficiency of over 99% and extend the service life of the filter element;
3. The design of the convenient handle significantly reduces the time for replacing the filter element, making the replacement of the filter element simple and portable.
4. The overall polypropylene design and hot melt welding treatment effectively prevent the end cover from falling off and secondary pollution.
5. The design of the sealing interface reduces the risk of side flow and ensures the sealing and reliability of filtration;
6. The foldable design increases the filtration area, resulting in a significantly lower pressure drop than ordinary filter elements,
7. The design with a large diameter increases the capacity for pollutants, prolongs the service life, and reduces production costs;
8. Equipped with a skeleton to enhance the pressure resistance of the filter element during use;
Z.Plex technology benefits:
Very low flow resistance
Excellent dirt holding capacity
Enhanced resistance to surface blinding
Good strength and thermal resistance
All polypropylene construction for exceptional
typical applications:
High Flow Z filters' proprietary depth filter matrix provides unmatched performance in these
Applications
RO pre-filtration
Well injection
Produced water filtration
Water flood / enhanced oil recovery
Amine filtration
Seawater filtration
general properties:
High Flow Z filters are available with two nominal and four absolute pore size ratings. They are made of 100% polypropylene construction. Tables 1, 2 and 3 show additional specifications and performances.
Working principle:
The high flow filter element is designed with a large diameter for efficient filtration, and has a high-strength support skeleton both inside and outside. It is made of multi-layer composite progressive filtering materials, and is integrally hot-melt welded with an external sealing ring. Designed with a single flow rate of 50-90m3/H, this high flow filter is suitable for fields such as large-scale reverse osmosis pre filtration. The new patented folding of this filter element combined with a 6/152mm large diameter design reduces the number of filters and the requirements for filter housing size. At the same time, multiple filtering media can be provided to meet other application requirements.
| Outside Diameter: | 6 inch(152mm) |
| Length: | 20 inch(528mm),40 inch(1022mm),60 inch(1538mm) |
|
Filter media: |
Pleated glass fiber |
| Support/Drainage: | Polypropylene (PP) |
| End caps : | Glass fiber reinforced Polypropylene |
| Seal Material : | EPDM, NBR |
| Removal Rating: | 1 µm , 4.5 µm , 6 µm , 10 µm ,20 µm ,40 µm ,70 µm,100µm |
| Maximum Operating Temperature: |
Pleated glass fiber:121°C Pleated PP: 82°C Melt Blown PP: 65°C |
| Maximum Differential Pressure: |
Pleated glass fiber:3.4 Bar at 121°C Pleated PP: 3.4Bar at 82°C Melt Blown:1.03Bar at 65°C |
| Recommended Change out Differential Pressure: | 2.4Bar at 20°C |
| Suggested maximum Flow of water: |
20 inch length:660LPM 40 inch length:1,300LPM 60 inch length:1,900LPM |
Popular water filter for reference :
GE Water PX05-30EHE
SWC5-LD ro membrane filter
SWC5-LD-4040 - Hydranautics
PFTM4060UHFJ
HFU660UY045J P all Ultipleat HighFlow
HFV660PP100PH13 P all Vector HighFlow
7EC48891129T1152111C1
7EC48891129M1152111C1
CS604LGT2H13 coalescer elements
HF40PP070C01 CUNO HIGH FLOW Filter
NXA1020U Nexis PP depth element (10 micron, 20")
Power Plant Safety Filter Core CRHCPP040500NA
3M High Flow HF60PP005D01 Filter Cartridge
High Flow Water Filters HFU620CAS010JUW
3M High Flow 5μm 40" Filter Cartridge HF40PP005A01
HF40PP070D01
Parker T23R40AZ
DFG001PP2R DUOFLO 3M FILTERING ELEMENT
MCY4463PFRPH4
MCY4440PFRPH4
AB1PFR7PV44
ESPA2MAX
BW30FR-400/34
PX01-40/PX05-40
3M item HF10PP001D01
RO filter( high flow cartridge filter) 3M Hf40PP001b01
RMHM-P050-40EP
ME3310CPR13H P ALL FILTER
HFU660UY045H13
P all emflon filter AB2HTPR7WH4
P all emflon filter AB1HTPR7WH4
HFU660GF100H
Parker T23R40AZ
water filter HFU640UY100J
Filter HFU660UY200H
water filter RMHM-P050-40EP
3M 740 B 740B40PP010D1 Filter Cartridge
SLK7002NFP
SLK7002J060P
HC0293SEE5
PG36M100U2NG
filmtech SW30HR LE-400
Dupont SR900
Dow Filmtec Bw30-4040 Brackish Water Reverse Osmosis Membrane Element
Membrane Element ESPA2 MAX
RO Membrane ( 40-40) (ESPA-1)
RO Membrane ( 40-40) ( ESPA-2)
SWXFR-400/34i and BW30XFR-400/34i Filmtec
SEDIMENT WATER FILTER AQE-15-047
SEDIMENT WATER FILTER AQE-15-045
XP-G1-6050V
CLR 5-40 M8S
CLR 5-30 H21
SR90-400i
SEA WATER MEMBRANES SW30 HRLE-440
FILMTEC Reverse Osmosis Membrane BW30-400
BW30-4040 brackish water RO filter membranes
Dow DUPONT Filmtec RO Membrane TW30HP-4611
membranes element TM720-400
membranes element TM820-400/SWCF-LD
R.O. membranes SW30HRLE-400
Reverse osmotic membrane TORAY TMG 20D-400
FAQ:
Q1.What is your packing clause?
Answer:generally, we put our goods in neutral white boxes and brown cartons. Or customize any kind of packing according to your request. If you have registered a patent legally,We can put the goods in your brand packing box after receiving your authorization.
Q2.What is your payment condition?
Answer: T / T 30% as a margin, 70% before delivery.Before the balance is paid, we will show you the photos of the products and packaging.
Q3.What is your delivery condition?
Answer: EXW, FOB, CFR, CIF, DDU.
Q4.What's your delivery time?
A:Generally speaking,it takes 30 to 60 days after receiving the advance payment.The exact time of delivery depends on the items and quantities of your order.
Q5. Can you make it according to the sample?
Answer:Yes,we can produce it through your sample or technical drawings.We can build molds and fixtures.
Q6.What is your sample policy?
Answer:if we have spare parts in stock, we can provide the sample, but the customer must pay the sample cost and the cost of the sample.Express delivery cost.
Q7.Did you test all the goods before delivery?
Answer: Yes, we have 100% tests before delivery.
Q8: how do you make our business a long and good relationship?
Answer: 1. We maintain good quality and competitive price to ensure our customers benefit.
){kind=link}