Replace Facet Caa Series Coalescer Cartridges Coalescer Filter Element Caa38-5

• Customization: Available
• Material: Chemical Fiber
• Application: Industry, Food and Beverage, Medicine, Textile, Metallurgy
• Model NO.: CAA38-5
• Type: Folding Microporous Filter
• Filter Connector: Flat Connector
• Filtration Grade: Medium Filter
• ID: 89mm
• Od: 152mm
• H: 960mm
• Media: Composite Filter Material
• Skeleton: Carbon Steel/Stainless Steel Available
• End Cap: Carbon Steel/Stainless Steel Available
• Transport Package: Carton
• Specification: 175*175*980mm
• Trademark: Lefilter
• Origin: China
• HS Code: 8421999090
• Production Capacity: 5000PCS/Month
• Package Size: 17.00cm * 17.00cm * 98.00cm
• Package Gross Weight: 6.000kg

Product Description

Product Description

CAA38-5 Coalescer Filter Element Product Introduction
CAA38-5 Coalescer cartridge is a kind of high-efficiency separation and filtration element, which is mainly used for the separation of impurities, oil-water Coalescer and dewatering treatment of natural gas, hydraulic oil, fuel and other media. The following are the detailed parameters and characteristics:
Core parameters
Filtration precision: 0.1-10μm (support multi-level precision selection)
Differential pressure: up to 6MPa, working pressure 5.2Bar (75psi)
Temperature range: up to 200 ºC (short-term tolerance), recommended long-term working temperature of 115 ºC

Material composition:
Filter layer: sintered fibre tube, polypropylene, polyester or glass fibre
Skeleton: stainless steel, galvanised steel or reinforced nylon
Seal: Nitrile rubber (Buna-N)
Flow design: Outside-in and inside-out to optimise impurity retention efficiency.
Areas of application
Natural Gas Processing: Gas-liquid separation in natural gas separators to remove particles and water.
Hydraulic oil purification: filtration of hydraulic oil impurities in construction machinery, ships and other scenarios to extend equipment life.
Fuel dewatering: oil-water separation for aviation paraffin, diesel and other fuels to improve oil quality.
Industrial oil treatment: for turbine oil, gear oil and other oil aggregation and dehydration
Structural features
Multi-layer composite design: including nanofibre filter paper, glass fibre filter paper and polyester support layer to enhance the dirt-holding capacity.
End cap type: flat end cap or threaded/rod mounted, suitable for different equipment interfaces.
Flame-retardant and corrosion-resistant: some models are made of flame-retardant materials, suitable for high temperature or corrosive environments.
Selection and maintenance recommendations
Selection Basis: Select the appropriate model according to the media type (oil, gas, fuel), working temperature, pressure and filtration precision requirements.
Replacement cycle: It is recommended to monitor the pressure difference (replacement threshold 1.1Bar), and clean or replace regularly to maintain efficiency.

Product Parameters

 

Model number	ID((mm)	OD(mm)	H(mm)	END CAP
CAA11-5	89	152	290	Rod
CAA14-5	89	152	370	Rod
CAA14-5SB	89	152	380	Screw Base
CAA22-5	89	152	560	Rod
CAA22-5SB	89	152	580	Screw Base
CAA28-5	89	152	730	Rod
CAA28-5SB	89	152	740	Screw Base

CAA33-5	89	152	840	Rod
CAA33-5SB	89	152	860	Screw Base
CAA38-5	89	152	960	Rod
CAA38-5SB	89	152	990	Screw Base
CAA43-5	89	152	1100	Rod
CAA43-5SB	89	152	1140	Screw Base
CAA56-5	89	152	1430	Rod
CAA56-5SB	89	152	1450	Screw Base

FAQ

Q: What do I need to check for a quotation?
A: the working conditions, ID, OD, L,Media ect

Q:What is the approximate lead time?
A: Generally 7-10 working days,  It has to do with the number of orders and scheduling

Q: What is the shipping package like?
A:  Usually packed in cardboard boxes, large quantities of pallet packaging, if you need custom packaging, please let us know in advance!

Q: Are you a manufacturer or a trader and where is your factory located?
A:  We are a direct factory, factory location in: Filter Industrial Park, High-tech Industrial Development Zone,Xinxiang City,Henan P.R.China. (Post code :453000)

Q: Can you customize products?
A: Of course, if you can provide us with detailed specifications or drawings. Our mission is to inspire customers with ideas about our products and provide satisfactory solutions.

Q:  What are the payment terms?
A: Usually 100% TT, Negotiable for large contracts