How a cartridge dust collector works:
The cartridge dust collector intercepts dust through the surface of the cartridge. After the dusty airflow enters the equipment, the dust is trapped by the fiber layer of the cartridge and the clean air is discharged through the filter media. As the dust accumulates, the pulse valve is activated at regular time/pressure, and the compressed air is blown back to the cartridge, shocking down the accumulated dust to the dust collection box to maintain the filtration efficiency. Folding structure of the cartridge increases the filtering area, combined with coating technology to improve the dust removal effect, suitable for high-precision, continuous dust processing scenarios.
How a bag filter works:
A bag filter uses fiber bags to intercept dust. After the dusty gas stream enters, the dust is trapped by the outer surface of the filter bag, and the clean gas is discharged through the filter media. As the dust thickens and the resistance rises, the pulse valve is activated at regular time/pressure, and the high-pressure airflow reverses to blow the filter bag, which instantly expands and shakes off the dust to the dust hopper, restoring the filtration capacity. The filter bag is made of high temperature resistant and corrosion resistant material, which is suitable for metallurgy, cement, electric power and other high temperature and high concentration dust control scenarios.
Self-cleaning air filter working principle:
Self-cleaning air filter is not only suitable for air compressor pre-filtration, as long as the high purification requirements of the working conditions can be effectively filtered out of the production process emissions containing fine pollutants, self-cleaning air filter of the normal operation of the air separation equipment is essential to the safe operation of the long cycle! Can instantly release a pressure of 0.4-0.6mpa pulse airflow, rectified by the special nozzle spray, venturi coil suction, sealing, expansion from the inside of the filter cartridge uniformly flushed outward to the dust accumulated on the outside of the cartridge blown off, self-cleaning process is completed.
The principle of photo oxygen activated carbon plasma integrated machine:
1, ultraviolet light irradiation:
Ultraviolet light is the wavelength of 253.7nm light waves, it has the role of sterilization; at the same time, ultraviolet light also has the characteristics of strong penetration (can pass through most transparent substances). In the indoor installation of ultraviolet lamps as a light source, the indoor harmful objects such as formaldehyde, etc. absorbed into the ultraviolet light under the irradiation of the chemical reaction so as to be decomposed.
2,Catalytic effect:
The device that utilizes light energy to carry out chemical reactions is called a catalyst. Light and air molecules in the hydrogen atoms combined to produce highly active free radicals (OH-), this highly active free radicals and oxygen in the air to generate non-toxic and harmless reaction of water and carbon dioxide gas (O2), so as to achieve the purpose of purifying indoor air.
3,Ozone decomposition:
The use of strong oxidizing agent ozone to play a role in the degradation of pollutants. Ozone has a strong oxidizing ability (O3 = O2 - H2O), can oxidize various organic compounds in the air into water and the corresponding inorganic or nitrogen compounds and other substances such as oxygen, so as to achieve the effect of purifying indoor air. Ozone at room temperature for the gaseous form, soluble in water and the formation of micro-soluble gel state dispersed in the air to achieve the purpose of deodorization.
4, filtration:
The use of filter materials to adsorb harmful substances to purify the air is called adsorption or absorption method. Currently used adsorption materials are silica gel, charcoal, molecular sieve class and so on.
| model number |
Number of cartridges |
Cartridge Model |
Filter area M2 |
air volume m³/h |
Dimensions (L * W * H)mm |
| LF-XLC 6-1 |
12 |
LFKL-3266 |
120 |
7200 |
1010*2300*3600 |
| LF-XLC 6-2 |
24 |
240 |
14400 |
2020*2300*3600 |
| LF-XLC 6-3 |
36 |
360 |
21600 |
3030*2300*3600 |
| LF-XLC 6-4 |
48 |
480 |
28800 |
4040*2300*3600 |
| LF-XLC 6-5 |
60 |
600 |
36000 |
5050*2300*3600 |
| LF-XLC 6-6 |
72 |
720 |
43200 |
6060*2300*3600 |
| LF-XLC 8-1 |
16 |
160 |
9600 |
1010*2300*4080 |
| LF-XLC 8-2 |
32 |
320 |
19200 |
2020*2300*4080 |
| LF-XLC 8-3 |
48 |
480 |
28800 |
3030*2300*4080 |
| LF-XLC 8-4 |
64 |
640 |
38400 |
4040*2300*4080 |
| LF-XLC 8-5 |
80 |
800 |
48000 |
5050*2300*4080 |
| LF-XLC 8-6 |
96 |
960 |
57600 |
6060*2300*4080 |
| LF-XLC 8-7 |
112 |
1120 |
67200 |
7070*2300*4080 |
| LF-XLC 8-8 |
128 |
1280 |
76800 |
8080*2300*4080 |
1. What is the working principle of Liefeldt Dust Collector?
Answer:
Lifelite dust collector adopts high efficiency filtration technology, through the negative pressure generated by the fan to inhale the dusty gas, the dust is intercepted and filtered by the cartridge (e.g. polyester fiber, film-coated filter material, etc.), and the clean air is discharged. Some models support pulse blowback cleaning system to automatically clean the dust accumulated in the filter element to ensure long-term stable operation.
2. What do I need to pay attention to when installing the dust collector?
Answer:
Make sure the equipment is placed horizontally and away from flammable and explosive environments.
Check the voltage (e.g. 220V/380V) when connecting the power supply, and the grounding wire must be reliable.
The pipe interface needs to be sealed tightly to avoid air leakage affecting the dust suction efficiency.
Before the first startup, check whether the filter element is installed in place and whether the dust cleaning system is normal.
3. How often should the filter element be replaced?
Answer:
Filter cartridge life depends on the use of the environment and the nature of the dust, usually recommended:
Ordinary dust: Replace every 6-12 months.
High humidity, sticky dust: check/replace every 3-6 months.
If a significant drop in suction power or a broken cartridge is found, it needs to be replaced immediately.
4. What may be the reason for the suction power decreasing when the equipment is running?
Answer:
Possible causes include:
Clogged cartridge: clean or replace the cartridge.
Air leakage from pipes or connections: check the sealing.
Dust collection bucket is full: Empty and clean the filter in time.
Failure of the fan: contact after-sales service to test the motor or circuit.
5. How to solve the excessive noise of dust collector?
Answer:
Check whether the equipment is placed smoothly to avoid resonance.
Clean the fan impeller of accumulated dust or foreign matter.
Make sure the silencer (if any) is intact.
If the noise level continues to exceed the limit (>65dB), please contact technical support.
6. What industries are Liefeldt dust collectors used in?
Answer:
This series of dust collectors are widely used in:
Industrial dust collection in woodworking, metal processing, laser cutting and so on.
Raw material recovery in chemical and pharmaceutical industries.
Dust control in food and building materials industry.
Please select the specific model according to the dust characteristics (particle size, temperature and humidity, etc.).
){kind=link}