2-Ton Single Machine Reverse Osmosis Water Purification Equipment

• Customization: Available
• Certification: ISO9001, CE
• Salt Rejection Rate: 99.5%
• Model NO.: LF-RO-0021
• Application: Industry
• Capacity: 2t/H
• "Influent Pressure": ≤0.3MPa
• Water Inlet: DN50
• Water Outlet: DN50
• "Top Pipe Diameter": DN65
• "Enhanced Backwash": Yes
• Processing Technology: Reverse Osmosis Treatment
• Transport Package: Wooden Crate
• Specification: LF-RO-0021
• Trademark: LEFILTER
• Origin: Xinxiang, China
• Production Capacity: 500000/Month
• Package Size: 150.00cm * 150.00cm * 150.00cm
• Package Gross Weight: 200.000kg

Product Description

Product Description

Reverse osmosis device is a pure water equipment that uses a semi permeable membrane to desalinate saltwater under the action of pressure difference. It is opposite to the direction of natural osmosis, so it is called reverse osmosis, also known as reverse osmosis. The purpose of separation, extraction, and purification can be achieved by using reverse osmosis with a pressure greater than the osmotic pressure. In water treatment, the pre treated raw water can enter the fresh water side through the RO membrane under high pressure, while various salts are impacted by the high-pressure water flow, causing the water to split into two, thus achieving the separation of salt and water.

Reverse osmosis equipment is divided into single-stage reverse osmosis and two-stage reverse osmosis equipment. Single stage reverse osmosis equipment is a device that removes certain substances from water through a single membrane separation technology; Double stage reverse osmosis equipment is based on single-stage reverse osmosis equipment and further filtered through an RO reverse osmosis membrane to achieve a higher desalination rate standard. When the water quality of the raw water is close to that of tap water, the two-stage reverse osmosis technology can make the conductivity value of the water less than 5 US/cm, and even reach below 2 US/cm. It can remove more than 99% of the dissolved salts, colloids, microorganisms, particles, and organic matter in the water, becoming an excellent equipment commonly used in modern pure water and ultra pure water (ultra pure water) engineering.

 

Product Parameters

treatment effect	When the water source is tap water: Primary reverse osmosis water conductivity: ≤ 30 μ s/cm Secondary reverse osmosis water conductivity: ≤ 5 (2) μ s/cm"
operation parameters	Maximum allowable temperature for continuous operation: 35C Continuous operation pH range: 2-11 Short term cleaning (30 minutes) pH range: 1-13"
Operating parameters	Maximum inflow SDI15<5 Maximum inflow rate: 85gpm (19m3/h/branch) L Maximum operating pressure: 600psi (41bar) e Maximum pressure drop per unit: 15psi (1.0bar) Allowable free chlorine content:<0.1ppm Securities abbreviation: Xinxiang Filter F Single minimum concentrated water volume: 3m3/h for the first level and 2.3m3/h for the second level Conventional arrangement: 1-1, 2-1, ≈ 2:1, etc Power supply: 380V/220V/50Hz three-phase four wire
Rack material	Stainless steel and carbon steel coated with epoxy resin
MODE	fully automatic

Single machine reverse osmosis selection table:

model	Membrane model	Membrane shell model	Water production rate (t/h)	Imported pipe diameter	Export pipe diameter	Recommended membrane count	Recommended recycling rate%
LF-RO-0011	4040	4040	1	DN20	DN20	4	50
LF-RO-0021	4040	4040	2	DN25	DN20	8	55
LF-RO-0031	4040	4040	3	DN32	DN25	12	65
LF-RO-0041	4040/8040	4040/8040	4	DN40	DN32	16/4	65/55
LF-RO-0051	8040	8040	5	DN40	DN32	4/5	62
LF-RO-0101	8040	8040	10	DN50	DN40	10	70
LF-RO-0151	8040	8040	15	DN65	DN50	15	75
LF-RO-0201	8040	8040	20	DN65	DN65	20	75
LF-RO-0301	8040	8040	30	DN80	DN80	30	75
LF-RO-0401	8040	8040	40	DN100	DN80	40/42	75
LF-RO-0501	8040	8040	50	DN125	DN100	50/54	75
LF-RO-060	8040	8040	60	DN125	DN100	60	75
LF-RO-0701	8040	8040	70	DN125	DN125	72	75
LF-RO-0801	8040	8040	80	DN150	DN125	84	75
LF-RO-0901	8040	8040	90	DN150	DN125	90	75
LF-RO-1001	8040	8040	100	DN150	DN125	102	75

Double machine reverse osmosis selection table:
 

model	Membrane model	Membrane shell model	Water production rate (t/h)	Imported pipe diameter	Export pipe diameter	Recommended membrane count	Recommended recycling rate%
LF-RO-00111	4040	4040	1	DN20/DN20	DN20/DN20	6/4	65/65
LF-RO-002 1I	4040	4040	2	DN32/DN25	DN25/DN25	12/8	65/65
LF-RO-003 II	4040	4040	3	DN32/DN32	DN32/DN25	16/12	65/75
LF-RO-004 II	8040	8040	4	DN50/DN40	DN40/DN32	6/4	65/63
LF-RO-00511	8040	8040	5	DN50/DN40	DN40/DN32	10/5	65/68
LF-RO-010 II	8040	8040	10	DN50/DN50	DN50/DN40	15/10(12/9)	75/80
LF-RO-015ll	8040	8040	15	DN65/DN50	DN50/DN50	20/15	75/80
LF-RO-020 II	8040	8040	20	DN80/DN65	DN65/DN65	30/20	75/80
LF-RO-030 II	8040	8040	30	DN100/DN80	DN80/DN80	40/30	75/80
LF-RO-040 1l	8040	8040	40	DN125/DN100	DN100/DN80	54/42	75/80
LF-RO-050 II	8040	8040	50	DN125/DN100	DN100/DN100	66/48	75/80
LF-RO-060 II	8040	8040	60	DN125/DN125	DN125/DN100	78/60	75/80
LF-RO-070 1I	8040	8040	70	DN150/DN125	DN125/DN125	90/72	75/80
LF-RO-0801l	8040	8040	80	DN150/DN125	DN125/DN125	102/78	75/80
LF-RO-090 II	8040	8040	90	DN150/DN150	DN150/DN125	114/90	75/80
LF-RO-100 II	8040	8040	100	DN200/DN150	DN150/DN125	120/96	75/80

Application industry

1. Reverse osmosis devices are used for the preparation of pure water and ultrapure water in industries such as electronics, industry, medicine, and food;
2. Purification and preparation of water for textile and chemical industries;
3. Purification and preparation of water for food and beverage, as well as water for brewing processes;
4. Concentrate and recover useful substances from aqueous solutions in industrial production;
5. Pre desalination treatment of high-pressure boiler feedwater for power plants and other enterprises;
6. Desalination of brackish water and seawater:
7. The purified water device serves as the primary desalination equipment for high-purity water production.