| Customization: | Available |
|---|---|
| Material: | Chemical Fiber |
| Application: | Industry, Food and Beverage, Medicine, Textile, Metallurgy |
|
Still deciding? Get samples of US$ 40.26/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Flow Water Filter Cartridge for Electronics Industrial
Product Introduction:
The high flow filter element uses deep fine polypropylene or fiberglass membrane as the filter material, with a large diameter of 6 inches/152mm, no center rod, one-way opening, and specially designed liquid flow from inside to outside, ensuring that all pollutant particles are intercepted inside the filter element. The design of super large flow rate significantly reduces the usage of filter elements and filters in the same flow rate application, greatly saving equipment investment costs and labor costs. 
Product Features:
1. The combination of surface filtration and deep filtration can significantly reduce the number of filter elements and significantly reduce the size of the supporting shell compared to ordinary filter elements;
2. The filter layer is made of high-efficiency and low resistance materials, which can achieve ultra-high filtration efficiency of over 99% and extend the service life of the filter element;
3. The design of the convenient handle significantly reduces the time for replacing the filter element, making the replacement of the filter element simple and portable.
4. The overall polypropylene design and hot melt welding treatment effectively prevent the end cover from falling off and secondary pollution.
5. The design of the sealing interface reduces the risk of side flow and ensures the sealing and reliability of filtration;
6. The foldable design increases the filtration area, resulting in a significantly lower pressure drop than ordinary filter elements,
7. The design with a large diameter increases the capacity for pollutants, prolongs the service life, and reduces production costs;
8. Equipped with a skeleton to enhance the pressure resistance of the filter element during use;
Working principle:
The high flow filter element is designed with a large diameter for efficient filtration, and has a high-strength support skeleton both inside and outside. It is made of multi-layer composite progressive filtering materials, and is integrally hot-melt welded with an external sealing ring. Designed with a single flow rate of 50-90m3/H, this high flow filter is suitable for fields such as large-scale reverse osmosis pre filtration. The new patented folding of this filter element combined with a 6/152mm large diameter design reduces the number of filters and the requirements for filter housing size. At the same time, multiple filtering media can be provided to meet other application requirements.
| Outside Diameter: | 6 inch(152mm) |
| Length: | 20 inch(528mm),40 inch(1022mm),60 inch(1538mm) |
|
Filter media: |
Pleated glass fiber |
| Support/Drainage: | Polypropylene (PP) |
| End caps : | Glass fiber reinforced Polypropylene |
| Seal Material : | EPDM, NBR |
| Removal Rating: | 1 µm , 4.5 µm , 6 µm , 10 µm ,20 µm ,40 µm ,70 µm,100µm |
| Maximum Operating Temperature: |
Pleated glass fiber:121°C Pleated PP: 82°C Melt Blown PP: 65°C |
| Maximum Differential Pressure: |
Pleated glass fiber:3.4 Bar at 121°C Pleated PP: 3.4Bar at 82°C Melt Blown:1.03Bar at 65°C |
| Recommended Change out Differential Pressure: | 2.4Bar at 20°C |
| Suggested maximum Flow of water: |
20 inch length:660LPM 40 inch length:1,300LPM 60 inch length:1,900LPM |
FAQ:
Q1.What is your packing clause?
Answer:generally, we put our goods in neutral white boxes and brown cartons. Or customize any kind of packing according to your request. If you have registered a patent legally,We can put the goods in your brand packing box after receiving your authorization.
Q2.What is your payment condition?
Answer: T / T 30% as a margin, 70% before delivery.Before the balance is paid, we will show you the photos of the products and packaging.
Q3.What is your delivery condition?
Answer: EXW, FOB, CFR, CIF, DDU.
Q4.What's your delivery time?
A:Generally speaking,it takes 30 to 60 days after receiving the advance payment.The exact time of delivery depends on the items and quantities of your order.
Q5. Can you make it according to the sample?
Answer:Yes,we can produce it through your sample or technical drawings.We can build molds and fixtures.
Q6.What is your sample policy?
Answer:if we have spare parts in stock, we can provide the sample, but the customer must pay the sample cost and the cost of the sample.Express delivery cost.
Q7.Did you test all the goods before delivery?
Answer: Yes, we have 100% tests before delivery.
Q8: how do you make our business a long and good relationship?
Answer: 1. We maintain good quality and competitive price to ensure our customers benefit.
){kind=link}