Fully automatic cleaning filter is a mesh filter that automatically cleans according to pressure difference or time. It has the advantages of high filtration accuracy and thorough cleaning, and is widely used in industrial water, sewage treatment, heat exchange and other fields. It is a highly automated and easy to operate filtering equipment.
1. Filtering
Fluid flows in from the inlet and flows out through the small gaps of the wedge-shaped filter cartridge inside the filter. Impurities and particles are easily trapped, and when they accumulate on the surface of the filter, a pressure difference is generated.
2. Cleaning
When the pressure difference between the inlet and outlet reaches 0.5kg/cm2 (adjustable), the backwash system of the filter will start working automatically. The operation is carried out by a differential pressure controller set on the body, an electric drain valve, and a rotatable stainless steel cleaning brush driven by a motor. Impurities and particles are easily brushed off by the steel brush and then discharged through the drain valve. The backwash time lasts for about 15 seconds (adjustable) and does not stop during backwash.
![Automatic Self Cleaning Water Filter Lfz-700-X/Waste Water Treatment/Water Filter](//www.micstatic.com/athena/img/transparent.png)
project |
parameter |
explain |
flow |
20-10000m3/h |
According to the filtering accuracy and impurity content, you can inquire with our company, and we provide the most suitable model |
Minimum work pressure |
0.2MPa(g) |
|
working pressure |
1.6MPa(g) |
Special requirements can be customized |
Path diameter |
DN50-DN700 |
Special requirements can be customized |
Maximum operating temperature |
80ºC |
High temperature type can be customized |
Filtering accuracy |
50-3000um |
|
Filter material |
304,316L |
|
Equipment material |
Q235,304,316L |
|
Motor power |
0.37-1.1KW |
|
supply voltage |
380V/50Hz/ |
|
Backwash flow rate |
Less than 1% of the total traffic |
|
Backwash time |
15s(Adjustable) |
|
Backwash pressure difference |
0.5Kg/cm2(Adjustable) |
|
Multiple forms of filters
Vertical self-cleaning filter
Vertical self-cleaning filters can be used for filtering industrial wastewater, seawater, food and pharmaceutical wastewater, circulating water, as well as for emulsion regeneration, waste oil, liquid raw materials and other filtration treatments.
Fully automatic Y-shaped filter
The fully automatic Y-shaped filter mainly includes: housing, filter cartridge (filtering dirt), cleaning mechanism (including cleaning brush, brushing filter screen), controller (collecting and comparing pressure difference signals, outputting control signals), cleaning motor (receiving control signals to provide the required power for the cleaning mechanism), and electric ball valve (receiving control signals to discharge dirt).
Pry mounted filter
The pry mounted filter adopts two-stage filtration, with the first stage using a self-cleaning filter to filter out large suspended solids and particulate impurities. It has the characteristics of uninterrupted water supply during cleaning and discharge, short cleaning time, and low discharge water consumption. The second stage uses a shallow sand filter, which can effectively remove particulate matter and reduce turbidity. If specific filter materials are installed, such as activated carbon, zeolite, etc., they can also adsorb and remove corresponding organic compounds, ions, etc.
Fully automatic horizontal self-cleaning filtration
The fully automatic horizontal self-cleaning filter adopts high-strength stainless steel wedge-shaped mesh, which has the characteristics of large processing capacity, long service life, and high cleaning efficiency. This machine adopts intelligent differential pressure control and timed control to automatically clean the filter screen. Throughout the entire process, the materials did not stop flowing, achieving continuous and automated production.
![Automatic Self Cleaning Water Filter Lfz-700-X/Waste Water Treatment/Water Filter](//www.micstatic.com/athena/img/transparent.png)
![Automatic Self Cleaning Water Filter Lfz-700-X/Waste Water Treatment/Water Filter](//www.micstatic.com/athena/img/transparent.png)
1. Question: What industrial water filters do you mainly produce?
A: Our factory mainly produces self-cleaning filters, security filters, bag filters, sand and gravel filters, fiber ball filters, dirt removers, backwash filters, etc., which are mainly used in industrial water treatment equipment. In addition, we also produce accessories for filters such as filter screens, filter cartridges, filter bags, and other filter elements.
2. Question: What is the maximum processing capacity of the self-cleaning filter? What is the range of accuracy?
A: This filter can achieve a maximum processing capacity of 10000m ³/h and a filtration accuracy of 50-3000 microns.
3. Which type of filter can be used to reduce turbidity?
A: You can use our quartz sand filter, which uses quartz sand as the filtering medium to filter water with high turbidity through a certain thickness of granular or non granular quartz sand under a certain pressure, effectively intercepting and removing suspended solids, organic matter, colloidal particles, microorganisms, chlorine, odors, and some heavy metal ions in the water.
4. Question: Where is your factory located? How can I get there?
A: Our factory is located in Xinxiang City, Henan Province. It takes 2 hours by high-speed rail from Beijing or fly to Zhejiang Airport, and then we will pick up your team. We warmly welcome you to visit us anytime.
5. Q: What is the installation method of the filter?
A: Skid loading and transportation. Just connect the inlet/outlet flange and drain it.
6. Question: Can you customize products?
Of course, if you can provide us with detailed specifications or drawings. Our mission is to inspire customers with ideas about our products and provide satisfactory solutions.