| Customization: | Available |
|---|---|
| Material: | PP or Fiber Glass |
| Application: | Industry, Food and Beverage, Medicine, Textile, Metallurgy |
|
Still deciding? Get samples of US$ 0/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Pleated Filter Cartridges 25um 3m High Flow Filter Cartridges Hf60PP025b01
Product Features:
1. The combination of surface filtration and deep filtration can significantly reduce the number of filter elements and significantly reduce the size of the supporting shell compared to ordinary filter elements;
2. The filter layer is made of high-efficiency and low resistance materials, which can achieve ultra-high filtration efficiency of over 99% and extend the service life of the filter element;
3. The design of the convenient handle significantly reduces the time for replacing the filter element, making the replacement of the filter element simple and portable.
4. The overall polypropylene design and hot melt welding treatment effectively prevent the end cover from falling off and secondary pollution.
5. The design of the sealing interface reduces the risk of side flow and ensures the sealing and reliability of filtration;
6. The foldable design increases the filtration area, resulting in a significantly lower pressure drop than ordinary filter elements,
7. The design with a large diameter increases the capacity for pollutants, prolongs the service life, and reduces production costs;
8. Equipped with a skeleton to enhance the pressure resistance of the filter element during use;
Z.Plex technology benefits:
Very low flow resistance
Excellent dirt holding capacity
Enhanced resistance to surface blinding
Good strength and thermal resistance
All polypropylene construction for exceptional
typical applications:
High Flow Z filters' proprietary depth filter matrix provides unmatched performance in these
Applications
RO pre-filtration
Well injection
Produced water filtration
Water flood / enhanced oil recovery
Amine filtration
Seawater filtration
general properties:
High Flow Z filters are available with two nominal and four absolute pore size ratings. They are made of 100% polypropylene construction. Tables 1, 2 and 3 show additional specifications and performances.
Working principle:
The high flow filter element is designed with a large diameter for efficient filtration, and has a high-strength support skeleton both inside and outside. It is made of multi-layer composite progressive filtering materials, and is integrally hot-melt welded with an external sealing ring. Designed with a single flow rate of 50-90m3/H, this high flow filter is suitable for fields such as large-scale reverse osmosis pre filtration. The new patented folding of this filter element combined with a 6/152mm large diameter design reduces the number of filters and the requirements for filter housing size. At the same time, multiple filtering media can be provided to meet other application requirements.
| Outside Diameter: | 6 inch(152mm) |
| Length: | 20 inch(528mm),40 inch(1022mm),60 inch(1538mm) |
|
Filter media: |
Pleated glass fiber |
| Support/Drainage: | Polypropylene (PP) |
| End caps : | Glass fiber reinforced Polypropylene |
| Seal Material : | EPDM, NBR |
| Removal Rating: | 1 µm , 4.5 µm , 6 µm , 10 µm ,20 µm ,40 µm ,70 µm,100µm |
| Maximum Operating Temperature: |
Pleated glass fiber:121°C Pleated PP: 82°C Melt Blown PP: 65°C |
| Maximum Differential Pressure: |
Pleated glass fiber:3.4 Bar at 121°C Pleated PP: 3.4Bar at 82°C Melt Blown:1.03Bar at 65°C |
| Recommended Change out Differential Pressure: | 2.4Bar at 20°C |
| Suggested maximum Flow of water: |
20 inch length:660LPM 40 inch length:1,300LPM 60 inch length:1,900LPM |
Other model:
HFU660UY020J,HFU660UY045H,HFU660UY045H1,HFU660UY045H13,HFU660UY045H13W,
HFU660UY045H4,HFU660UY045H4W,HFU660UY045HW,HFU660UY045J,HFU660UY060H,
HFU660UY060H1,HFU660UY060H13,HFU660UY060H13W,HFU660UY060H4,HFU660UY060H4W,
HFU660UY060HW,HFU660UY060J,HFU660UY1000H,HFU660UY1000H1,HFU660UY1000H13,
HFU660UY1000H13W,HFU660UY1000H4 ,HFU660UY1000H4W,HFU660UY1000HW,
HFU660UY1000J,HFU660UY100H,HFU660UY100H1,HFU660UY100H13,HFU660UY100H13W,
HFU660UY100H4,HFU660UY100H4W,HFU660UY100HW,HFU660UY100J,HFU660UY200H,
HFU660UY200H1,HFU660UY200H13,HFU660UY200H13W,HFU660UY200H4,HFU660UY200H4W,
HFU660UY200HW,HFU660UY200J,HFU660UY400H,HFU660UY400H1,HFU660UY400H13,
HFU660UY400H13W,HFU660UY400H4,HFU660UY400H4W,HFU660UY400HW, HFU660UY400J,
HFU660UY700H,HFU660UY700H1,HFU660UY700H13,HFU660UY700H13W,HFU660UY700H4,
HFU660UY700H4W,HFU660UY700HW,HFU660UY700J,HP1351A10ANP01,HP3202A10ANP01,
HFU620CAS010JUW HFU640CAS010JUW HFU660CAS010JUW HFU620UY020H13 HFU640UY045H13
HFU660UY400H13 HFU620GF100H13 HFU640GF200H13 HFU660GF050H13HFU620UY020J HFU640UY020J
HFU660UY020J HFU620UY045J HFU640UY045J HFU660UY045J HFU620GF100H13 HFU640GF200H13
HFU660GF100H13 HFU620UY200J HFU640UY200J HFU660UY200J HFU620UY400J HFU640UY400J
HFU660UY400J HFU620UY700J HFU640UY700J HFU660UY700J
FAQ:
Q1.What is your packing clause?
Answer:generally, we put our goods in neutral white boxes and brown cartons. Or customize any kind of packing according to your request. If you have registered a patent legally,We can put the goods in your brand packing box after receiving your authorization.
Q2.What is your payment condition?
Answer: T / T 30% as a margin, 70% before delivery.Before the balance is paid, we will show you the photos of the products and packaging.
Q3.What is your delivery condition?
Answer: EXW, FOB, CFR, CIF, DDU.
Q4.What's your delivery time?
A:Generally speaking,it takes 30 to 60 days after receiving the advance payment.The exact time of delivery depends on the items and quantities of your order.
Q5. Can you make it according to the sample?
Answer:Yes,we can produce it through your sample or technical drawings.We can build molds and fixtures.
Q6.What is your sample policy?
Answer:if we have spare parts in stock, we can provide the sample, but the customer must pay the sample cost and the cost of the sample.Express delivery cost.
Q7.Did you test all the goods before delivery?
Answer: Yes, we have 100% tests before delivery.
Q8: how do you make our business a long and good relationship?
Answer: 1. We maintain good quality and competitive price to ensure our customers benefit.
){kind=link}