Hard Water Softening Treatment Equipment for Printing and Dyeing Textiles

• Certification: ISO9001, CE
• Salt Rejection Rate: 98.0%
• Application: Industry
• Capacity: 200 Gallon
• Transport Package: Container
• Specification: 5000
• Model NO.: LFRH-15
• Origin: China

Product Description

Hard water softening treatment equipment for Printing and dyeing textiles:

Softening water equipment, also known as equipment that reduces water hardness, mainly removes calcium and magnesium ions from water. In cases where the inflow is deep well water or the hardness of the water source is high, the use of softening water equipment is to remove the calcium and magnesium ion content in the water and reduce the calcium and magnesium ions in the water. Softening water equipment cannot reduce the total salt content of water during the softening process. It is widely used in hot water boiler systems, heat exchange systems, industrial cooling systems, central air conditioning systems, and other water equipment systems.

Our strengths:

Double tank and double valve:
The dual tank and dual valve system consists of two resin tanks (main tank and auxiliary tank) with hydraulic control valves and a salt tank. The control valve switches the water circuit between the main tank and the auxiliary tank to ensure that there is always one tank in operation, which can supply water simultaneously, alternate regeneration, or alternate water supply for backup and use.

Single tank and single valve:
A single tank and single valve softening system refers to a resin tank, a multi way valve, and a salt tank that stop discharging water during system regeneration. Configuration structure: fiberglass tank+water distributor+automatic control valve+resin+salt tank+salt valve+salt suction pipeline+pipeline+pressure gauge for water production, backwashing, salt suction, water injection, and washing.

 

Purification and softening equipment:
The problem that cannot be avoided in the pre purification of softened water is that it contains a certain amount of sediment and other visible impurities (deep well water is relatively better). If a certain amount of sediment enters the softening tank and the resin is surrounded by sediment, it will cause insufficient contact between the resin and the raw water, thereby affecting the softening effect. If it is not possible to completely flush out of the tank during the backwashing process, there is a possibility of forming blocky substances. Therefore, it is recommended to install a quartz sand filter before the softening filter to improve the inlet and outlet water quality of the softening filter, as the raw water is well water.

Working principle:
The softened water equipment is composed of a fully automatic softener controller, salt tank, strong acid sodium ion cation resin, resin tank (usually stainless steel resin tank and fiberglass resin tank), and softener accessories. The most widely used hard water softening treatment equipment in industrial boilers, cooling circulating water, steelmaking, rolling, large transformers, and civil hot water boilers is to issue instructions to electromagnetic valves or multi way servo valves through water flow and time control to complete the water supply and regeneration of softened water equipment.

Production site:

Technical parameter table:

Model	Processing capacity	Tank specifications	Salt box specifications	Automatic control valve specifications	piping	Resin filling amount
LFRH-1	1 ton/hour	Φ250*1400	250*1400	60L	DN20	Resin 50L
LFRH-2	2 ton/hour	Φ300*1400	300*1400	60L	DN20	Resin 75L
LFRH-4	4ton/hour	Φ400*1650	400*1650	100L	DN25	Resin 150L
LFRH-5	5 ton/hour	Φ500*1750	500*1750	200L	DN25	5*40''
LFRH-10	10 ton/hour	Φ750*1900	600*1900	500L	DN50	5*40''
LFRH-15	15 ton/hour	Φ900*1900	750*1900	800L	DN50	7*40''
LFRH-20	20 ton/hour	Φ1000*1900	900*1900	1000L	DN65	7*40''
LFRH-25	25 ton/hour	Φ1200*2300	1000*2200	1500L	DN65	10*40''
LFRH-30	30 ton/hour	Φ1500*2400	1200*2300	1500L	DN65	15*40''
LFRH-50	50 ton/hour	Φ1800*2600	1500*2400	2000L	DN80	20*40''

Technical parameters::
Inlet water pressure: 0.18-0.6
Mpa Operation mode: automatic, manual
Regeneration methods: forward flow, reverse flow
Working power supply: 220V/50Hz
Control methods: time, flow
Equipment types: purification and softening equipment, single tank single valve, double tank double valve
Tank material: stainless steel, fiberglass, steel lined plastic material
Water and electricity saving: water production rate above 98%

Customer site:

FAQ:
1. Question: Are you a trading company or a manufacturer?
A:We are a professional manufacturer of all kinds of filter cartridges, housings, and filtration systems. We provide you with the total filtration solutions with our years of industry experience.
2. Question: Can we undertake EPC projects
A: Of course, we are a mature company in all aspects, and our aim is to provide one-stop services without any intermediate links.
3. Q: Can you make customized products?
A: Yes, of course, if you can provide us with detailed specifications or drawings. Our mission is to make customers ideas on the products and provide the customer satisfied solutions.
4. Question: Can you provide accessories for the corresponding equipment?
A: Yes, we have complete equipment and spare parts
5. Q: Can I use our own designed package?
A: Yes, size, color, logo, and packaging style all can be customized.
6.Q: What's your MOQ?
A: Normally, equipment 1 set. please feel free to contact us so that we can make some shipping recommendations for you to save the cost based on the quantity you need.
7.Q: I am a small business owner, Can I buy from you?
A: Yes, you are warmly welcomed. To grow with our customers is our goal. We would like to grow with you together.
8. Q: What is your general lead time?
A: For equipment normally 25-30 working days .
9. Question: How should I make the payment?
A: A: We strongly recommend T/T, L/C are acceptable.
10.Question: What services can you provide if there are after-sales problems with the equipment
A: Our dedicated personnel will solve all after-sales problems you encounter 24 hours a day