When water runs through the water inlet into the filter cartridge, the impurities were intercepted on the inner wall of the filter cartridge, and the clean water flows out of the outlet. As the impurities in the inner surface of the filter tube piles up, the differential pressure between the inlet and outlet runs up to the pre-set value, the self-cleaning process will begin. The self-cleaning process can also begin when it reaches the washing time or manual prefabrication.
And it includes two steps: Open the automatic drain valve on the filter;The cleaning brush inside the filter mesh is drove by the motor, and the impurities stopped by the filter mesh will be discharged from the drain valve. When cleaning, the system does not cut off; the whole operation process of the filter is controlled by an intelligent control box which is equipped with the filter. Control mode consists of differential pressure, time, manual and PLC control.
![Industrial Water Filter Automatic Self-Cleaning Filter for Waste Water/Irrigation/Seawater Desalination](//www.micstatic.com/athena/img/transparent.png)
![Industrial Water Filter Automatic Self-Cleaning Filter for Waste Water/Irrigation/Seawater Desalination](//www.micstatic.com/athena/img/transparent.png)
project |
parameter |
explain |
flow |
20-10000m3/h |
According to the filtering accuracy and impurity content, you can inquire with our company, and we provide the most suitable model |
Minimum work pressure |
0.2MPa(g) |
|
working pressure |
1.6MPa(g) |
Special requirements can be customized |
Path diameter |
DN50-DN700 |
Special requirements can be customized |
Maximum operating temperature |
80ºC |
High temperature type can be customized |
Filtering accuracy |
50-3000um |
|
Filter material |
304,316L |
|
Equipment material |
Q235,304,316L |
|
Motor power |
0.37-1.1KW |
|
supply voltage |
380V/50Hz/ |
|
Backwash flow rate |
Less than 1% of the total traffic |
|
Backwash time |
15s(Adjustable) |
|
Backwash pressure difference |
0.5Kg/cm2(Adjustable) |
|
Model |
Dimension |
Inlet&outlet |
Max. flow |
Pressure |
Micron |
Motor |
LFZ-250-50 |
φ273*1000 |
DN25~DN50 |
50 t/h |
10bar |
≥50μm |
0.18kw/RV040 |
LFZ-300-100 |
φ325*1200 |
DN80~DN125 |
100 t/h |
10bar |
≥100μm |
0.37kw/RV063 |
LFZ-400-150 |
φ426*1300 |
DN150 |
200 t/h |
10bar |
≥200μm |
|
LFZ-480-200 |
φ480*1550 |
DN200 |
300 t/h |
10bar |
≥300μm |
|
LFZ-530-250 |
φ530*1650 |
DN250 |
450 t/h |
10bar |
≥300μm |
0.75kw/RV075 |
LFZ-600-300 |
φ600*1750 |
DN300 |
550t/h |
10bar |
≥300μm |
|
LFZ-700-350 |
φ700*2000 |
DN350 |
700t/h |
10bar |
≥500μm |
|
LFZ-800-400 |
φ800*2150 |
DN400 |
1000t/h |
10bar |
≥800μm |
|
LFZ-900-450 |
φ900*2300 |
DN450 |
1200t/h |
10bar |
≥1000μm |
|
LFZ-1000-500 |
φ1000*2500 |
DN500 |
1500t/h |
10bar |
≥1500μm |
|
LFZ-1100-600 |
φ1100*2600 |
DN600 |
1800 t/h |
10bar |
≥3000μm |
1.5kw/RV090 |
LFZ-1200-700 |
φ1200*2800 |
DN700 |
2300 t/h |
10bar |
|
|
Note: 1,Material :galvanized steel /Stainless steel ;
2,Other special industry (Toxic liquid),please let us know first ;
3 Accept the customize ; |
1. Question: What industrial water filters do you mainly produce?
A: Our factory mainly produces self-cleaning filters, security filters, bag filters, sand and gravel filters, fiber ball filters, dirt removers, backwash filters, etc., which are mainly used in industrial water treatment equipment. In addition, we also produce accessories for filters such as filter screens, filter cartridges, filter bags, and other filter elements.
2. Question: What is the maximum processing capacity of the self-cleaning filter? What is the range of accuracy?
A: This filter can achieve a maximum processing capacity of 10000m ³/h and a filtration accuracy of 50-3000 microns.
3. Which type of filter can be used to reduce turbidity?
A: You can use our quartz sand filter, which uses quartz sand as the filtering medium to filter water with high turbidity through a certain thickness of granular or non granular quartz sand under a certain pressure, effectively intercepting and removing suspended solids, organic matter, colloidal particles, microorganisms, chlorine, odors, and some heavy metal ions in the water.
4. Question: Where is your factory located? How can I get there?
A: Our factory is located in Xinxiang City, Henan Province. It takes 2 hours by high-speed rail from Beijing or fly to Zhejiang Airport, and then we will pick up your team. We warmly welcome you to visit us anytime.
5. Q: What is the installation method of the filter?
A: Skid loading and transportation. Just connect the inlet/outlet flange and drain it.
6. Question: Can you customize products?
Of course, if you can provide us with detailed specifications or drawings. Our mission is to inspire customers with ideas about our products and provide satisfactory solutions.